ADJ Fog Fury 3000
The ADJ Fog Fury 3000 is a 1500W professional DMX Fog Machine with new advances in technology. It has a special heating element design that uses an oil type transmission throughout the pipeline to prevent clogging. It is also equipped with a high performance pump system for optimum output. ADJ s Electronic Thermo Sensing (ETS) technology is on-board to maintain optimum heat levels with no warm-up time between fog blasts.
The Fog Fury 3000 also has convenient features such as a LED heating indicator system that changes colors depending on whether the fogger is heating up, ready to use, or if the fog fluid is low. It also has built-in DMX control with a 3-button digital LCD display on the rear panel with 3 operational modes: Manual, DMX or built-in Timer Remote.
This fogger produces 21,000 cubic feet of fog per minute, has an external tank with a 5 Liter capacity, and has an 8 minute warm-up time. This machine uses water-based fog fluid only.
1500W professional DMX Fog Machine
High performance pump for optimum output
ADJ s Electronic Thermo Sensing (ETS) technology to always maintain optimum heat levels with no warm-up times between fog blasts
Automatic circuit cut-off to protect pump if fog fluid tank runs dry
Special heating element design that uses an oil type transmission pipeline system to minimize the possibility clogging
LED heating indicator system in tank: Red = Heating; Green = Ready to use; Flashing = Fog fluid tank is low
3 Operational modes: Manual, Timer Mode, or DMX Controlled
3 DMX Channels
3-button DMX LCD display on rear panel
3-pin DMX XLR In/Out connections
Fog Output: 21000 (cu.ft/min)
Warm-up time: 8 min.
External fog fluid tank: 5 Liter
Single yoke to mount on a wall or from trussing bracket
Convenient carrying handle
Power Consumption: 1600W max
Power: AC 120V/60Hz or 230V/50Hz (non switching)
Dimensions (LxWxH): 18.75 x 13.75 x 12.75 / 475 x 345 x 321mm
Weight: 25 lbs. / 11.28 kgs
Only use high quality, water-based fog fluid
Specifications subject to change without notice